3rd Wednesday about 6:00pm
UNLESS NOTIFIED DIFFERENTLY!
Room 3 which is on the east end of the bldg.,
Doors still open at 6pm with meeting at 7pm and end of meeting by 9pm.
The St. Germain Comm. Center (SGCC) is about 1 block north on Hwy. 155 from the intersection of Hwy. 70 and 155 at the West end of town.
Take 155 north about 1 block and the SGCC is on the left. If you are coming from Sayner on Hwy. 155 the SGCC is on the right just before getting into town,
It is next to the Fire Station.
Northwood Turners Agenda Aug. 18, 2010
Demo: Ron Warshall will run the meeting this month. Not sure on the demo at this time. Anyone can come up with something and volunteer.
The meeting is at the St. Germain Community Center. Doors open at 6pm with meeting at 7pm. Center is about 1 block north of the intersection of Hwys 70 & 155 on Hwy. 155 towards Sayner. It is on the left hand side of the road just East of the Fire Dept.● New Members & Guests
● Secretary Report: Tim
● Treasurer Report: George
● Library Report: Harv
● Old Business:
● Demos for future meetings????? Finishing, George????
● Shop crawl at ??? shop for Sept.
● New Business:
● Picnic at Bill Kingsbury’s shop. Give a summary of what happened there. Pen turning for spouses.
● Demonstrator?? Anything new from committee???
● Pay $20 dues to George for 2010.
• UPCOMING MEETINGS
• Meeting dates for 2010: Aug. 18, Sept. 15, Oct. 20, Nov. 17, and Dec. 15.
• Raffle: Dale $2/ticket
• Gallery: Ron & Don
Dale Peterson, President Northwood Turners
--
Tight lines,
Musky Pete
Northwood Turners Agenda March 17, 2010
Demo: Let’s do a sanding discussion/demo. Bring in some things that you use to sand your turnings. This could include sandpaper, sanding discs for drill attachment, sanding blocks, sticks, steel wool, and whatever else you may use. If you have a turning that you are having problems with getting a smooth surface by sanding, bring it in and we will discuss what might be done to improve the surface.
The meeting is at the St. Germain Community Center. Doors open at 6pm with meeting at 7pm. Center is about 1 block north of the intersection of Hwys 70 & 155 on Hwy. 155 towards Sayner. It is on the left hand side of the road just East of the Fire Dept.
● New Members & Guests
● Secretary Report: Tim
● Treasurer Report: George
● Library Report: Harv
● Old Business:
● Demos for future meetings????? Bring in rough wood to show how to cut out blanks for bowls, platters, vases, etc.
● Finishing
● Shop crawl at ??? shop for April
● New Business:
● Class on airbrush painting your work.. Workshop from 9-3pm with lunch for $20??? May be a ways off as instructor is still working on his new shop. May substitute a demo at our meeting until his shop is complete. March or April meeting. Don’t think this will happen soon.
● Woodburning get together this winter at St. Germain Comm. Center??
● Demonstrator?? Alan Lacer, Nick Cook.
● Pay $20 dues to George for 2010.
• UPCOMING MEETINGS
• Meeting dates for 2010: March 17, April 21, May 19, June 16, July Picnic ???, Aug. 18, Sept. 15, Oct. 20, Nov. 17, and Dec. 15.
• Raffle: Dale $2/ticket
• Gallery: Ron & Don
Minutes from Jan. 20, 2010 meeting:
The meeting was called to order by President Dale Peterson at 7pm. We had 18 members and guests Roy Kelling and Rich Boersma present. There was no Secretary report as Tim headed to Haiti to help the earthquake victims but got on the wrong plane and ended up in St. Martens, POOR GUY!! George gave the treasury report. We bought a new grinding system from OneWay for $155. We will also be buying a grinder and wheels to go along with the jigs. 8 of the 20 present are not AAW members. A discussion was held on using club equipment and doing demos at the meeting. If you are not an AAW member, you are not covered by their insurance so you will not be able to check out the club lathe or grinding system. You will not be able to do demos either.
We need volunteers for future demos at the meetings. Please call me at 715-542-2012 if you would like to do a demo at one of our meetings.
Our Jan. shop crawl was held at Ed Sandle’s shop in Conover. We mainly covered different ways to sharpen tools. About 15 members turned out and brought some of their tools along to see how to sharpen them. We covered using the Wolverine grinding system, using a sandpaper disc on the lathe, and using a hone. Thanks to Ed for hosting the shop crawl.
We are still working on a workshop for airbrushing which would be $20. It would cover the workshop from 9am-3pm and include lunch. The demonstrator is still working on his shop so, in the meantime, I will try to get him to one of our meeting to do a demo. Probably in April or May.
We will also see if there is enough interest to do a woodburning get together at the St. Germain community center.
We have lost our meeting room at the community center and will still meet there but in Rm. #3 which is smaller but we will make it work. Take a left after coming in the door and into the gym and the 1st left into Rm. #3.
The Feb. shop crawl will be at Tom Martens shop in Tomahawk. The date and directions will be sent out shortly. We will probably demo the new grinding system the club bought. Tom will also demo coring.
Looks like the July picnic will be at Bill Kingsbury’s house. More details to follow. I may try to get Alan Lacer to come to our picnic and do workshops again if there is enough interest.
It was brought up that some members have had problems with stuff ordered from Don Pencil. Things were not shipped and phones and e-mails not answered. “Buyer Beware”
Our next meeting is Feb. 17th. I will be down south so Ron Warshall will run the meeting. Contact him if you would like to do a demo at the meeting 715-282-6198.
Respectfully submitted: Dale Peterson
--
Tight lines,
Musky Pete
Northwood Turners Agenda January 20, 2010
Demo: Do not have any volunteers to do demo, so let’s do something on signing your work. Bring whatever you use to sign your work and show it to the group. Bring some wood along to demo the signing and also so others can try it. I will bring a woodburner along and some signing pens. I also have a couple Nail Art pens that I will bring, used for fingernail art.
The meeting is at the St. Germain Community Center. Doors open at 6pm with meeting at 7pm. Center is about 1 block north of the intersection of Hwys 70 & 155 on Hwy. 155 towards Sayner. It is on the left hand side of the road just East of the Fire Dept.
● New Members & Guests
● Secretary Report: Tim will be gone, poor guy is going to St. Martens.
● Treasurer Report: George
● Library Report: Harv will also be gone.
● Old Business:
● Demos for future meetings????? Bring in rough wood to show how to cut out blanks for bowls, platters, vases, etc.
● How to sign your work.
● Finishing
● Shop crawl at ??? shop for Feb.
● New Business:
● Class on airbrush painting your work.. Workshop from 9-3pm with lunch for $20??? May be a ways off as instructor is still working on his new shop. May substitute a demo at our meeting until his shop is complete. March or April meeting.
● Woodburning get together this winter at St. Germain Comm. Center??
● Demonstrator?? Alan Lacer, Nick Cook.
● Shop crawl at Ed Sandle’s shop, sharpening demos. Club is buying a grinder, wheels, and Wolverine jig set up so members can use and also for future demos at meetings.
● Pay $20 dues to George for 2010.
• UPCOMING MEETINGS
• Meeting dates for 2010: Feb. 17, March 17, April 21, May 19, June 16, July Picnic ???, Aug. 18, Sept. 15, Oct. 20, Nov. 17, and Dec. 15.
• Raffle: Dale $2/ticket
• Gallery: Ron & Don
Dale Peterson, President Northwood Turners
--
Tight lines,
Musky Pete
Northwood Turners Chapter Meeting Minutes
Date: December 16, 2009
The meeting was called to order by President Dale Peterson at 7:00 p.m. Minutes and Treasury were approved.
Reminder: it's time to pay your 2010 dues, still a bargain at $20.00 for the entire year. You can give the money to any of the club officers, Dale, Tim, Ron, or George.
Sheila was presented with a gift certificate to Craft Supplies in return for her years of generosity with cookies, brownies, fudge and lots of wonderful treats. Thank you very much Sheila!
Sherry Werner spoke to us about a web service she is going to begin. She is designing a website for artists with the capability of showing art from various views. Items on the website will be for sale. She can accept uploaded pictures or will do the photography for you if you wish. She can be contacted for more information at sherryps23@msn.com and her website address is www.WarnerWebWork.com .
There were a lot of nice items on the raffle table tonight and everyone who bought a ticket won something.
Tonight’s program was put on by Paul Hansen of Eagle River. Paul did a quick demo of turning a topwater musky fishing bait. He spent the rest of his demonstration talking about choosing wood, how to measure where to put hooks, eyes (the seeing kind), eyes (the one you tie to your line), and other hardware like lips, fins, spinners, rivets, propellers and more. Paul gave us sources for purchasing hardware and finishing materials for making lures, see below. He discussed lure design, and how placement of hardware affects the behavior and success of each bait. He went on to talk about painting, finishing, and using the baits. He answered many questions, and all in all put on one of the best demonstrations we’ve had to date. Thank you Paul for your time, your generosity (see next paragraph), and a wonderful program! You’re welcome back any time.
Paul also donated a number of his Pick N’ Pick Pocket fishing tools used for untangling backlashes, (ask Dale how to use them, he’s an expert – Hah!), for our raffle.
Sources for lure parts and hardware:
Moore’s Lures Dick Moore – Woodruff 715-356-6834
Hedron Inc. http://www.hedroninc.com/ 651-430-9606
Northwood Turners Agenda December 16, 2009
Demo: Paul Hansen is Vice President of the Headwaters Chapter of Muskies Inc. and an accomplished Musky bait maker. Paul will demo how to turn, attach hooks, and paint custom musky baits. Suick Bait Co. has been making baits for years and only makes the Suick Jerk Bait. Well, last year, Paul was the 1st person to ever get Suick to make something other than the Suick. Paul’s custom Night Walker is the only bait that Suick has ever made besides the Suick. Paul is continuously trying out new designs and his baits have caught numerous large muskies for members of the Headwaters Chapter.
The meeting is at the St. Germain Community Center. Doors open at 6pm with meeting at 7pm. Center is about 1 block north of the intersection of Hwys 70 & 155 on Hwy. 155 towards Sayner. It is on the left hand side of the road just East of the Fire Dept.
• New Members & Guests
• Secretary Report: Tim
• Treasurer Report: George
• Library Report: Harv–
• Old Business:
• Demos for future meetings????? Bring in rough wood to show how to cut out blanks for bowls, platters, vases, etc.
• How to sign your work.
• Finishing
• Shop crawl at ??? shop for January
• New Business:
• Class on airbrush painting your work.. Workshop from 9-3pm with lunch for $20???
• Woodburning get together this winter at St. Germain Comm. Center??
• Demonstrator?? Alan Lacer, Nick Cook.
• Shop crawl at Bill Kingsbury’s shop
• Pay $20 dues to George for 2010.
• UPCOMING MEETINGS
• Meeting dates for 2010: Jan. 20, Feb. 17, March 17, April 21, May 19, June 16,
July Picnic ???, Aug. 18, Sept. 15, Oct. 20, Nov. 17, and Dec. 15.
• Raffle: Dale $2/ticket Special Raffle: $5/Ticket If anyone has a special piece of wood for this raffle, please bring to the meeting.
• Gallery: Ron & Don
Dale Peterson, President Northwood Turners
--
Northwood Turners Chapter Meeting Minutes
Date: November 18, 2009
The meeting was called to order by President Dale Peterson at 7:00 p.m. Minutes and Treasurer’s report were approved.
Ron Warshall gave a bit more information about his grant to teach Menominee Tribe members how to turn. We’re looking forward to hearing more about that.
Bill Kingsbury and Tim Muench led a discussion about form. Using Richard Raffin’s book, The Art Of Turned Bowls as an outline, various points about overall shape, curves, rims and feet were covered.
As always, if you have a piece of wood or something else (no broken car radios please) for the raffle, please bring it along. Also, if you have any questions about things you’re working on, or a piece of wood you don’t know just how to turn, bring them too and we can discuss your options.
Respectfully submitted,
Tim Muench Northwood Turners Secretary
Northwood Turners Agenda November 18, 2009
Demo: Tim Muench and Bill Kingsbury will lead a discussion on turned item form. How do you cut a log to get the blank you need to get the finished turning you are looking for. The meeting is at the St. Germain Community Center. Doors open at 6pm with meeting at 7pm. Center is about 1 block north of the intersection of Hwys 70 & 155 on Hwy. 155 towards Sayner. It is on the left hand side of the road just East of the Fire Dept.
• New Members & Guests
• Secretary Report: Tim
• Treasurer Report: George
• Library Report: Harv– New books from Arrowmont that I bought.
• Old Business:
• Demos for future meetings????? Bring in rough wood to show how to cut out blanks for bowls, platters, vases, etc. • How to sign your work.
• Finishing
• Shop crawl at Kingsbury’s shop
• New Business:
• Class on airbrush painting your work..
• Demonstrator?? Alan Lacer, Nick Cook.
• Shop crawl at Ed Sandles shop Nov. 14th.
• UPCOMING MEETINGS
• Meeting dates for 2009: Nov. 18th, Dec. 16th .
• Raffle: Dale $2/ticket Special Raffle: $5/Ticket If anyone has a special piece of wood for this raffle, please bring to the meeting.
• Gallery: Ron & Don
I will have the end grain sealer for those that have not picked it up. Please bring a container.
Greg Joseph 5 gal $30
Mike Regoee 5 gal. $30
Sheila Punches 2 Gal. $12
Tom Martin 5 gal. $30
Dale Peterson, President Northwood Turners
Northwood Turners Agenda October 21, 2009
Demo: Ron Warshall will demo making small boxes. Turning and finishing them. I will also show how to make your own sanding discs for your drill.
The meeting is at the St. Germain Community Center. Doors open at 6pm with meeting at 7pm. Center is about 1 block north of the intersection of Hwys 70 & 155 on Hwy. 155 towards Sayner. It is on the left hand side of the road just East of the Fire Dept.
• New Members & Guests
• Secretary Report: Tim
• Treasurer Report: George
• Library Report: Harv– New DVDs of AAW Journals, George. New books from Arrowmont that I bought.
• Old Business:
• Demos for future meetings????? Bring in rough wood to show how to cut out blanks for bowls, platters, vases, etc.
• Finishing
• Shop crawl at Kingsbury’s shop
• Shop Crawl for Nov.??? Volunteer???
• New Business:
• Dale’s class at Arrowmont.
• Demonstrator?? Alan Lacer, Nick Cook.
• UPCOMING MEETINGS
• Meeting dates for 2009: Nov. 18th, Dec. 16th .
• Raffle: Dale $2/ticket Special Raffle: $5/Ticket If anyone has a special piece of wood for this raffle, please bring to the meeting.
• Gallery: Ron & Don
Northwood Turners Agenda September 16, 2009
Demo:Bill Kingsbury will demo making small hollow forms. He has had a number of items like this in the gallery and they are very nice. Don’t miss this one!!!
The meeting is at the St. Germain Community Center. Doors open at 6pm with meeting at 7pm. Center is about 1 block north of the intersection of Hwys 70 & 155 on Hwy. 155 towards Sayner. It is on the left hand side of the road just East of the Fire Dept.
● New Members & Guests
● Secretary Report: Tim
● Treasurer Report: George
● Library Report: Harv– New DVDs of AAW Journals, George.
● Old Business:
● Demos for future meetings????? Bring in rough wood to show how to cut out blanks for bowls, platters, vases, etc.
● Finishing
● Shop Crawl for Oct.??? Volunteer???
● New Business:
● Demonstrator?? Alan Lacer, Nick Cook.
• UPCOMING MEETINGS
• Meeting dates for 2009: Oct. 21st, Nov. 18th, Dec. 16th .
• Raffle: Dale $2/ticket Special Raffle: $5/Ticket If anyone has a special piece of wood for this raffle, please bring to the meeting.
• Gallery: Ron & Don
Dale Peterson, President Northwood Turners
--
Tight lines,
Musky Pete
Northwood Turners Agenda August 19, 2009
Demo: Let’s bring our hook tools that we made at the picnic and give them a try at the meeting. I will bring the club lathe and if someone else can bring a lathe, we will try out the tools on end grain wood. I will bring a few pieces to practice on.The meeting is at the St. Germain Community Center. Doors open at 6pm with meeting at 7pm. Center is about 1 block north of the intersection of Hwys 70 & 155 on Hwy. 155 towards Sayner. It is on the left hand side of the road just East of the Fire Dept.
● New Members & Guests
● Secretary Report: Tim
● Treasurer Report: George
● Library Report: Harv– New DVDs of AAW Journals, George.
● Old Business:
Demos for future meetings?????
Picnic: At John Jozwowski house in Eagle River in July and tool making.
● New Business:
● Vilas Co. Fair??
● Demonstrator?? Alan Lacer, Nick Cook.
• UPCOMING MEETINGS
• Meeting dates for 2009: Aug. 19th, Sept. 16th, Oct. 21st, Nov. 18th, Dec. 16th.
• Raffle: Dale $2/ticket Special Raffle: $5/Ticket If anyone has a special piece of wood for this raffle, please bring to the meeting.
• Gallery: Ron & Don
Dale Peterson, President Northwood Turners
--
Tight lines,
Musky Pete
Northwood Turners Picnic
Saturday, July 11th, 2009
John Jozwowski’s Shop
1056 Hwy. 45 South, Eagle River
9 am to Noon or so.
COOKOUT
We will be cooking up brats and hamburgers with all the trimmings. Call John at 338-3303 if you are bringing a dish to pass. He also needs a head count to see how much meat to buy.
TOOL MAKING
Before the cookout we will finish heating, bending, and sharpening the hook tools we started at my house during the shop crawl.
Take Hwy. 45 south out of Eagle River past the Hwy. 70 intersection by Pro Guide and John’s house is about ½ mile on the left. Look for the sign.
NO MEETING IN JULY!!!!!!!!!!!!
--
Tight lines,
Musky Pete
Northwood Turners Agenda June 17, 2009
Demo: Ron Warshall will demo making the Berger type end grain tool. Ron will also show us how to sharpen chain saws and we will demo making some cuts like the box cut that Bill Kingsbury talked about at our last meeting. Leave raffle items outside the building by the door and we will continue to hold the raffle outside weather permitting.
The meeting is at the St. Germain Community Center. Doors open at 6pm with meeting at 7pm. Center is about 1 block north of the intersection of Hwys 70 & 155 on Hwy. 155 towards Sayner. It is on the left hand side of the road just East of the Fire Dept.
New Members & Guests
Secretary Report: Tim
Treasurer Report: George
Library Report: Harv– New books and DVDs?? in library.
Old Business:
Dues for 2009 are due in Jan. so be sure to pay George $20 at the meeting or mail him a check for $20 made out to Northwood Turners. Mail to:
George VanBeynen; 8236 North End Rd., Mercer, WI 54547.
Demos for future meetings?????
New Business:
Picnic: At John Jozwowski house in Eagle River in July, may combine with tool making.
Tool making at Tim Muench’s shop in Aug.
Arrowmont fall catalog
• UPCOMING MEETINGS
• Meeting dates for 2009: June 17th, July 15th (Picnic??), Aug. 19th, Sept. 16th, Oct. 21st, Nov. 18th, Dec. 16th.
• Raffle: Dale $2/ticket Special Raffle: $5/Ticket If anyone has a special piece of wood for this raffle, please bring to the meeting.
• Gallery: Ron & Don
Northwood Turners Agenda May 20, 2009
Demo: Tim Muench will demo a new technique on making spheres and also turn a wooden scoop.The meeting is at the St. Germain Community Center. Doors open at 6pm with meeting at 7pm. Center is about 1 block north of the intersection of Hwys 70 & 155 on Hwy. 155 towards Sayner. It is on the left hand side of the road just East of the Fire Dept.
● New Members & Guests
● Secretary Report: Tim
● Treasurer Report: George
● Library Report: Harv– New books and DVDs?? in library.
● Old Business:
● Crawl for May. Shop crawl will be at my house Sat. May 16th from 9am- noon and we will cut up the steel bars we have to make hook tools. We will also sharpen them so they are ready to make into hook tools at Tim’s shop in June or July.
New Business:
● Picnic; At John Jozwowski house in Eagle River in June or July.
● Tool making at Tim Muench’s shop in June or July.
• Dues for 2009 are due in Jan. so be sure to pay George $20 at the meeting or mail him a check for $20 made out to Northwood Turners. Mail to:
George VanBeynen; 8236 North End Rd., Mercer, WI 54547.
• Demos for future meetings?????
• Exhibit at Vilas Co. Fair for woodturnings. What about doing demo at the fair. Talked to Lois from fair about different categories for turnings. Badger Woodturning club in Madison does fair demos, pens, tops, small bowls, goblets.
• UPCOMING MEETINGS
• Meeting dates for 2009: June 17th, July 15th (Picnic??), Aug. 19th, Sept. 16th, Oct. 21st, Nov. 18th, Dec. 16th.
• Raffle: Dale $2/ticket Special Raffle: $5/Ticket If anyone has a special piece of wood for this raffle, please bring to the meeting.
• Gallery: Ron & Don
Dale Peterson, President Northwood Turners
--
Tight lines,
Musky Pete
Northwood Turners Agenda March 18, 2009
Demo: We will discuss how to cut up a tree to obtain different blanks which result in different wood patterns in the final turning. John Jordan has 2 new DVDs on how to cut and turn green wood. Excellent illustrations on wood patterns. The meeting is at the St. Germain Community Center. Doors open at 6pm with meeting at 7pm. Center is about 1 block north of the intersection of Hwys 70 & 155 on Hwy. 155 towards Sayner. It is on the left hand side of the road just East of the Fire Dept.● New Members & Guests
● Secretary Report: Tim
● Treasurer Report: George
● Library Report: Harv– New books and DVDs?? Need system for hauling in library.
● Old Business:
● Grant application for video equipment approved for $700.
● Shop crawl at John J. How did it go??? Shop Crawl for April.??????????
New Business:
When you send out the agenda for the meeting on Wed night Mar 18th could you please include that Mark Duginske and I will be coming to the meeting to pick up any of the butternut items that are completed. We are looking for a listing of those people that have made or are planning on making something for the Butternut Gallery at the Center for the Visual Arts. We need the items by April 17 so we can start to set up the show.
If you haven’t completed the items yet, then we will have to figure out how to get them to the CVA in time for the show.
• Dues for 2009 are due in Jan. so be sure to pay George $20 at the meeting or mail him a check for $20 made out to Northwood Turners. Mail to:
George VanBeynen; 8236 North End Rd., Mercer, WI 54547.
• Demos for future meetings?????
• Arrowmont catalog for Summer courses.
• No file cabinet for meeting room, check back in April.
• Need to start thinking about a new meeting place in case the town decides to use our room for storage of town records.
• Exhibit at Vilas Co. Fair for woodturnings. What about doing demo at the fair. Talked to Lois from fair about different categories for turnings. Badger Woodturning club in Madison does fair demos, pens, tops, small bowls, goblets.
• UPCOMING MEETINGS
• Meeting dates for 2009: April 15th, May 20th, June 17th, July 15th (Picnic??), Aug. 19th, Sept. 16th, Oct. 21st, Nov. 18th, Dec. 16th.
• Raffle: Dale $2/ticket Special Raffle: $5/Ticket If anyone has a special piece of wood for this raffle, please bring to the meeting.
• Gallery: Ron & Don
Dale Peterson, President Northwood Turners
--
Tight lines,
Musky Pete
Northwood Turners Meeting Agenda Jan 21st, 2009
Happy New Year!!!!!
Demo: Tools and Handles. Tim & Dale will lead a discussion on various tools and handles you can make yourself. If you have a tool or handle that you have made, bring to the meeting and tell everyone how you made it and what makes it special. Tim and I will talk about the diamond tool, small scrapers, point tool, and how to make different handles.
UPCOMING MEETINGS
Meeting dates for 2009: Jan. 21st , Feb. 18th , March 18th , April 15th, May 20th, June 17th, July 15th (Picnic??), Aug. 19th, Sept. 16th, Oct. 21st, Nov. 18th, Dec. 16th.
Northwood Turners Agenda Dec. 17th, 2008
Demo: Various turners will demo Christmas items. Dale will demo snowman icicle. Tim will demo Christmas trees. Ron Warshall will demo the Beale Buffing system. I plan on bringing a couple bowls I have and see if Ron can bring out a nice shine on them. Anyone else that wants to demo something can do so.
The meeting is at the St. Germain Community Center. Doors open at 6pm with meeting at 7pm. Center is about 1 block north of the intersection of Hwys 70 & 155 on Hwy. 155 towards Sayner. It is on the left hand side of the road just East of the Fire Dept.
● New Members & Guests
● Secretary Report: Tim
● Treasurer Report: George
● Library Report: Harv–New Alan Lacer DVDs, other new books and DVDs??
Old Business:
● Dennis McGill and I are working on a grant application for video equipment. Max. amount for grants is $1500 and application is due in mid Jan. Also wireless mic. for meeting with amplifier.
● Shop crawl at Ed Sandle’s shop on Dec. 13th 9am-noon CANCELLED!
● Shop Crawl for Jan.??????????
New Business:
● Jim Chamberlain, 479-2655, has some oak boards for sale. Boards are of various widths and lengths. All rough sawn to 1" think. Give him a call if interested and tell him I told you about the boards.
● Arrowmont Arts and Crafts School. Anyone interested in going Spring 2009. Class schedules and fees are out.
● Demos for future meetings?????
UPCOMING MEETINGS
● Meeting dates for 2009: Jan. 21st , Feb. 18th , March 18th , April 15th, May 20th, June 17th, July 15th (Picnic??), Aug. 19th, Sept. 16th, Oct. 21st, Nov. 18th, Dec. 16th.
.